You choose unfinished wood flooring for your house because of the customizability they provide. But it’s no surprise that you’ve seen that these floorings are more prone to marks and degradation. Rust stains and water deterioration are less likely with finished wooden floors planks.
Maintaining unfinished wood is sometimes challenging since soap can harm the wood, and water can tarnish and bulge the wood. All of these elements, and more, add to the difficulties associated with maintaining unfinished wood. Fortunately, there are several tried-and-true methods. This guide will show you how to clean unfinished wood effectively without causing damage.
Additionally, you will discover natural cleaning procedures that are safe for furniture and people.
Things to Consider Before Cleaning Unfinished Wood
Before beginning the cleaning process, it is also critical to understand the condition and unfinished wood. Older woods will need to be handled with care since they might be damaged, but modern woods retain their strength.
Furthermore, pinewood absorbs stains quickly, while other woods are more rigid and likely allow the color to remain on the surface. It would identify the most secure approach of cleaning the wood without causing it to deteriorate. The following techniques could get used to assess the durability of your wood:
Note: Dry cleaning techniques that need almost no water are better for woods that soak water fast. In comparison, wet methods could get utilized for timbers that do not absorb water quickly.
So, do you intend to use sealant agents to clean or polish them in the long term? Do you adore the beauty of your raw wood? Whatever you choose, understanding how to clean unfinished wood will save you money in the long run, and so how to clean is critical.
How To Clean Unfinished Wood?
Let’s look at some safe solutions for how to clean unfinished wood
Using a Nylon Fabric that is Soft
One of the simplest ways to maintain your unfinished wood is to utilize a soft cloth; ideally, a polyester cloth, to gently wipe off the surface. This procedure works well for unpainted hardwood surfaces that may not have a lot of debris in the grain.
Note: Using a clean, damp delicate nylon cloth, carefully clean the surface of your raw woods.
Use of Vinegar
Vinegar is a cleaning chemical that many experts use to clean a wide range of surfaces, including unpolished hardwood floors and tables. The acidic maturity of vinegar may be too severe and cause harm to your wood. As a result, it should get mixed with water or essence oil to reduce the intensity and smell of the vinegar.
Note: In a bowl, mix Half glass vinegar with 1 liter of water to get a dilute mixture. Immerse your wiping cloth/material in the solution, compress till all the liquid gets removed, then use the moist fabric to wipe the raw outer layer.
Making Use of Sandpaper
Sandpaper is an effective cleaning agent for raw wooden surfaces. This approach may get used to eliminating colored marks, grime, and other types of difficult stains from a hardwood surface.
Note: Remove the top dirt and debris using a brush. Clean the surface layer with a slightly moist towel. With 150 grit paper, carefully remove away the oil streaks from the wood. Sandpaper should get used in the grain direction, not the opposite way around.
Using Soap and Water
Cleaning products such as water and soap could also clean the surface of raw woods. Soaps containing powerful ingredients should get prevented to avoid visible damage.
Note: Create a mixture of water and soap. Immerse a soft cloth in the solution and wring out the excess water. Use the moist cloth to massage the floor regularly until the surface is clean. Then, using a towel or switching on the fan, rinse the surface.
Making use of Trisodium Phosphate
Surface marks can get cleaned using Trisodium Phosphate. On the wooden surface, apply a thin coating of trisodium phosphate. And use a soft wire brush, carefully scrub the area. After removing the marks and debris, pour a tiny amount of water on the raw surface and promptly rinse it off, and leave it to dry.
Making Use of Mineral Spirits
It is a petrochemical product that is applied to take the paint off from brushes and might be applied to clean scuff marks from the surface of raw wood. Nevertheless, the mineral spirit is hazardous to one’s health and should get cleaned with a mask.
Apply a small quantity of the reagent on the surface. And use a soft cloth or a towel, carefully scrub the reagent onto the surface. Quickly dry the surface with a soft cloth.
Mixing Murphy’s Oil And Water
Murphy’s oil is a well-known combination that is efficient for cleaning hardwood surfaces. Prepare a mixture of water and Murphy oil with the same amount you take in vinegar. Immerse the nylon cloth into the water and wring away any extra liquids. Allow the area to dry after wiping it clean with this moist cloth.
Making Use of Adhesive Rubber
The adhesive is made of natural rubber and is often used to clean raw wood. It helps by absorbing dirt and grime in the pores and cracks of raw timber because of its spongy texture.
Note: Apply the adhesive to the area and slowly rub it across the wood, rubbing it into the groove.
Cleaning Procedures
Clean regularly can assist in keeping dirt away from the wood surfaces, which might damage them. Always use soft sweeps while brushing away dust. Avoid soaking your wood except if strictly necessary since dampness can trigger it to swell.
Bottom Line
The procedures may help you with surface filth or deeply ingrained dirt in your raw wood. We’ve shown you practically every predicament that individuals find while dealing with problems on their hardwood surfaces.
Peter Willy is a dedicated smart home lighting enthusiast with a passion for exploring the latest innovations in the field. With years of hands-on experience, Peter buys new smart lighting products, rigorously tests them, and shares his insights through detailed troubleshooting guides and informative articles. His deep understanding of smart lighting technology and commitment to helping others make him a trusted source for anyone looking to enhance their home with the latest in smart lighting solutions
